Products
  HOME > PRODUCTS > Shooter machine > RB-DSM1
 
 
 
   
 
With parameters
 
 

Cotrol Mode: Dmx control
Spray: 80E, 70E,60E.....
Packing : 4sets/carton
Size:51*27*38cm
G.W:18kgs

CHECKING BEFORE OPENING BOX

Please check the box whether it is in good condition before opening it. If find the box is broken in transport please inform the transport company in time and keep the broken box as proof so we can claim to transport company for compensation.

The packing list below:
1.1 pc one shots launcher
2.1 pc power cable
3.1 pc dmx cable (3 pin xlr)

PRODUCTION INTRODUCTION
This machine is our unique stage effect product, it is whole new exterior design, consummate produce technics£¬original technical performance, make it is in the lead position among all others of its class. With our company experience in setting off fireworks for many years and extract the strongpoint of stage effect equipment. We manufacture this more powerful, and more compatibility, easy operational product.

Product Specification:
Size: 19*20*21 cm Weight: 4.3 KG
Voltage: 220V £¨110V available£©Power: 30 W

Characteristic£º
1. The machine is controlled by dmx, can shoot confetti and streamer by programming dmx controller, creating various effect via setting interval time of shooting.
2. It can work with any electric confetti cannon whose diameter is under 50 cm.
3. It can be placed on ground or hung on ceiling.
4.The shooting angel can be adjusted from 0¡«180¡ã
5.It can be programmed to shoot each confetti cannon separately or together.

INSTALLATION METHOD

1.Put the machine on the venue or hang it on ceiling, please make sure the machine is hanged firmly.
2.Put the electric confetti cannon connect to the Electric plug
3.Put dmx signal wire to the machine from dmx control, the machines are connected in series connection.
4.Setting right dmx number on the dmx address dips, one unit has 1 dmx channel, for example, 4 units, the dmx address should be 001,002,003,004¡­

ATTENTION
THE CONTROLLER USE 220V VOLTAGE
PLEASE MAKE SURE THE CONNECTION IS RELIABLE BEFORE YOU TURN ON THE POWER OF CONTROLLER

OPERATION INTRODUCTION
After installing finishing, please operate as following:
1.ADJUST: please adjust the shooting angel of the machine;
2.Put 4 pieces electric confetti cannon into shot tube and lock them, put the electric plug of confetti cannon into electric plug on the machine.
3.Turn on the power of dmx controller, put corresponding button to shot each confetti cannon, it can be controlled by our special dmx controller or standard dmx controller both.

TROUBLESHOOT SIMPLY TROUBLESHOOT SOLVE:
1.When put the dmx controller button, no any electric confetti work, please check the signal wire are connected well;
2.Turn on the power of machine, if find no any response, please check the power supply and power cable, the protective tube is good or not.
3.If shooting sequence is not right, please check the dmx address if setting correctly.


   
 
Local picture
 
 
 
   
 
Contact Us
 
 

Tel£º0086-519-83758526
Fax£º0086-519-83758526
E-mail£ºsale@confettioffer.com
Url£ºwww.confettioffer.com

Company address
RM415 UNIT2 BLDG1 FUCHEN PLAZA CHANGZHOU CHINA

Factory address
NO.11 GUJIA RD TANG QIAO TOWN ZHANGJIAGANG CITY JIANGSU CHINA